PRICES & INSTALLERS GUIDE
Benefits of Ridge Angel for Installers
SIMPLE TO USE
Ridge Angel allows you to fix the ridge without having to visually line up the ridge with the barge; as the Ridge Angel acts as a stop butt at the Barge Roll &/or Capping.
This allows you to provide a simple, effective and professional finish to match the quality of work you provide for your clients.
QUICK INSTALLATION
The Ridge Angel is installed on to ridge capping at the ground level.
Like roof sheeting, ridge capping can be measured and cut at ground level. This eliminates scratching of sheeting and less time standing on steep pitched roofs cutting ridges.
TIME SAVING
Removes the need to cut angles and join barges at the peak, now you can simply butt them together as the Ridge Angel then covers this area.
Saves time by not having to cut 45 degree angles to join barge and ridge capping; also eliminates silicone and riveting.
Installing Ridge Angel Face Plate (ONLY) 30 & 45 -
$23.99 per unit + Delivery
POSITION
Position Barge Bat on Ridge with Vice Grips
DRILL
Drill Ridge through pre-drilled Barge Bat Holes
RIVET
Rivet Barge Bat to the Ridge Capping
Ridge Angel Retrofit Includes 300mm attached Ridge Capping - $37.99 per unit + Delivery
STANDARD
Standard Non-Professional Finish
SILICON
Remove Retro Fit & Silicone Behind Mark
FITTING
Fitting Retro Fit 300
ATTACH
Replace Retro Fit & Screw & Rivet In Place
MARKING
Marking Joint of Retro Fit & Ridge Cap
CENTRE
Centre Face Place & Rivet to Barge Roll
Installing Ridge Angel Face Plate & Finial 30 & 45 -
$143.00 per unit + Delivery
PREPARATION
The finial can be painted at ground level
PLACEMENT
Use Ridge Angel Retro Fit with Finial for a more traditional finish with the ease of less cutting and installation time
INSTALL
A one piece decorative face plate and finial
The Ridge Angel should be fixed prior to installation of ridge for best results.
The Ridge Angel should be installed by a licensed Roof Plumber in conjuction with the Workcover Codes of Practice